• The Vacuum Anchor is a unique Patent Pending portable fall arrest anchor that enables mechanics in the aircraft industry to work safely on the wings, fuselage, and tail sections of planes
• Versatile and portable system can be used inside or outside the hangar without the need for fixed overhead lines that just get in the way
• Meets OSHA’s fall arrest requirements for anchors, and is approved for use on Boeing and Airbus aircraft. Suitable for use in Class 1, Division 2 locations
• Specially designed suction cup system and vacuum technology attached to the plane without damaging the aircraft in any way
• Incorporates a fail-safe back-up system with both visual and audio alarms for added worker safety
• Back-up vacuum chamber provides hours of safety in the event the air-line or power cord is severed.
• Installation is quick and easy, simply turn on the vacuum switch, wait for the green light to come on and then simply hook-up to the D-ring

Electric Vacuum Anchor System with Cart:

• 2200030 – Cart
• 2200019 – Electric Vacuum Pump
• 2200025 – Vacuum Anchor Pad Assembly, standard, for up to 65” radius surface
• 2200041 – Soft hose Assembly 50 ft.

Electric Vacuum Anchor System with Pelican Cases:

• 9500478 – Case for Pads (29” x 17-7/8” x 10-1/2”)
• 9500620 – Case for Pump (22-1/16” x 17” x 12-9/16”)
• 2200019 – Electric Vacuum Pump
• 2200025 – Vacuum Anchor Pad Assembly, standard, for up to 65” radius surface
• 2200041 – Soft hose Assembly 50 ft.

Compressed Air Vacuum Anchor System / Pneumatic:

• 2200070 – Compressed Air/Pneumatic Vacuum Pump
• 2200025 – Vacuum Anchor Pad Assembly, standard, for up to 65” radius surface
• 2200041 – Soft hose Assembly 50 ft.

Horizontal Vacuum Anchor System:

Choose one of the systems above and add the following :

• 2200400 – 40 ft. Horizontal Lifeline System
• 2200025 – Vacuum Anchor Pad Assembly
• 2200041 – Soft hose Assembly 50 ft.

Accessories:

• 2200022 – Vacuum Anchor Pad Assembly, for up to 30” radius surface
• 9501251 – Case for 2200022 Pump
• 1225006 – Lanyard, Force2™, 6 ft. length, snap hooks at each end

Planes are designed to land on the tarmac - you weren’t! The unique Vacuum Anchor system was designed with mechanics for mechanics. The convenient carrying handle and lightweight design allows simple installation. The vacuum anchor operates on single phase 115 volt electrical supply so no special outlets are needed. Once plugged in, simply turn the switch on and the motor (pump) starts running activating the red warning lights and alarms. Then, pressurize the pads by simply turning a knob, once the green light is activated your ready to hook-up.

The design and ease of use with this vacuum anchor will give you maximum safety wherever you need to work. Once installed, and the green light has been activated, simply attach DBI/SALA’s Force2™ shock absorbing lanyard (model# 1225006) to the D-ring on the pads and to the back of your harness and you’re protected – free to perform your maintenance and servicing duties safely! Configure as a horizontal lifeline system for added versatility and maneuverability.