|
RFID Tags For Your Fall Protection Equipment
| |
Shields For Cutting and Turning Machines
|
A variety Universal Chip Shields are available. They are
ideal for mills, drills, grinders, band saws,
or similar equipment including woodworking
machines. The shield places a barrier between
operators or other employees in the area and the
flying chips (swarf), sparks, and coolant generated from the tool. It keeps the chips and coolant contained.
For protection, the shield should be positioned
between the point-of-operation hazard and the operator. |
Universal Shield
|
|
These flexible-arm shields can be used on lathes, drills,
small mills, grinders, band saws, or similar equipment including woodworking
machines. The heavy-duty, flexible arms are made of spring steel and
are covered with vinyl to protect them from grease, oil, and contaminants
that would weaken their holding
ability. They offer virtually unlimited adjustment possibilities and
long-term holding ability. |
Flexible-Arm Shields
|
|
Drill Press safety chip shields provide
protection from flying chips, coolant, and rotating parts. They are usually
applied to small drill presses and can be
magnetically or permanently mounted. They can also be used on small mills.
The 3⁄16" thick clear polycarbonate shield provides visibility to the point
of operation. It locks in any vertical position. |
Drill Press Shield
|
Lathe chuck shields have a semicircular
shape made from impact-resistant, transparent
polycarbonate. The shields themselves are attached to a 1" zinc-plated extension tube. This
tube is inserted into a mounting bracket. The shield assembly does not
include the mounting bracket.
The semicircular shield covers half the circumference
of the lathe chuck because it is mounted an
equal distance from the chuck center.
Access to the chuck and workpiece is quick and
easy. The shield is lifted up and out of the way for the operator.
|
Lathe Chuck Shield
|
Mill Chip Shields are ideal for Bridgeport mills. They
place a barrier between flying chips (swarf),
sparks, coolant from the machine, and the operators
or other employees in the area. They can be
easily moved in or out of position to provide quick
tool and part changes.
These shields are quick and easy to install. They
attach directly to existing head machine bolts so
no additional drilling or tapping is required. |
Mill Chip Shield
|
|
